Table of Contents
The Pros and Cons of Fixing a Sagging Mattress on Your Own
If you have been waking up with backaches or just feel like your mattress is not as comfortable as it used to be, chances are your mattress is sagging or sinking. Mattresses can sag or sink due to age, body weight, or poor quality. However, instead of immediately buying a new one, you can attempt to fix the sagging or sinking by yourself. Before taking on this task, here are a few pros and cons of DIYing your sagging mattress fix.
The Pros
Cost-effective
The biggest advantage of fixing a sagging mattress by yourself is that it can save you money. A new mattress can be expensive, and if your mattress is still in good condition except for the sagging or sinking, a little effort on your part can make it last a little longer.
Easy fix
If your mattress is only slightly sagging, fixing it yourself can be an easy solution. There are different methods you can try, such as placing a piece of plywood underneath, flipping the mattress over or changing its position. It may be as simple as that, and you won’t have to spend hours figuring out what is wrong or how to fix it.
Improvement in sleep quality
A sagging or sinking mattress can lead to poor sleep quality, which can affect your overall health. Fixing the sagging can lead to a better sleeping experience, which will, in turn, increase your productivity and overall wellness.
The Cons
You may not be able to fix it
DIYing the fix to a sagging mattress ( Say Goodbye to Sagging Mattresses: Expert-Approved Methods to Extend Your Bed’s Life ) does not always work. If your mattress is old, has worn-out springs or has large sagging spots, it might be impossible to fix. The cost of fixing it yourself may not be worth it, and you might end up needing a new mattress after all.
You may void the warranty
If your mattress is still under warranty, attempting to fix it yourself can void the warranty. Mattress manufacturers provide warranty to ensure that they are responsible for delivering quality products to their customers. If you alter the mattress’s condition, warranty won’t work in case of any other damage.
You may cause more damage
If you don’t know what you are doing, you might make the sagging or sinking worse. Using an inappropriate method or over-tightening screws can lead to more damage. If in doubt, you should consult a professional or use the manufacturer’s recommendations.
In conclusion, fixing a sagging mattress is not always straightforward. It can be an easy fix, but it could also result in more damage or void warranty. However, if you are confident in your abilities and have the tools and knowledge necessary, DIYing your sagging mattress fix can be cost-effective, improve your sleep quality, and get you some more use out of your mattress.
FAQ: Fixing Sagging Mattresses
Q: Why do mattresses sag?
A: Mattresses can sag due to several reasons such as lack of support, overuse, poor quality, lack of maintenance, etc.
Q: Can a sagging mattress be fixed?
A: Yes, a sagging mattress can be fixed with some simple methods.
Q: What are the common methods to fix a sagging mattress?
A: Some common methods to fix a sagging mattress include placing a board under the mattress, adding a topper, flipping or rotating the mattress, and replacing the support system.
Q: How can placing a board under the mattress help fix sagging?
A: Placing a board under the mattress can help distribute weight more evenly and provide additional support to the mattress, therefore reducing sagging.
Q: What kind of board should be used to fix a sagging mattress?
A: A sturdy, flat board such as plywood or particleboard should be used to fix a sagging mattress.
Q: How can adding a topper help fix sagging?
A: Adding a topper can create a more even sleeping surface and provide additional support to the mattress, therefore reducing sagging.
Q: What kind of topper should be used to fix a sagging mattress?
A: A firm, supportive topper such as a memory foam topper or latex topper can help fix a sagging mattress.
Q: How can flipping or rotating the mattress help fix sagging?
A: Flipping or rotating the mattress can help redistribute weight and reduce the pressure on certain areas of the mattress, therefore reducing sagging.
Q: How often should a mattress be flipped or rotated?
A: It is recommended to flip or rotate a mattress every 6 months to reduce sagging and increase the lifespan of the mattress.
Q: What should be done if the support system is causing the sagging?
A: If the support system such as box spring or bed frame is causing the sagging, it should be replaced with a new, sturdy one.
Q: What should be done if the mattress is too old and worn out?
A: If the mattress is too old and worn out, it should be replaced with a new one.
Q: How can sagging be prevented in the first place?
A: Sagging can be prevented by choosing a good quality mattress with a supportive base, rotating or flipping the mattress regularly, and using a mattress protector to keep the mattress clean and free from moisture.
Q: Is it worth it to fix a sagging mattress or should I just replace it?
A: It depends on the severity of the sagging and the age of the mattress. If the sagging is minimal and the mattress is relatively new, it may be worth it to fix it. However, if the sagging is severe or the mattress is old and worn out, it may be more cost-effective and beneficial to replace it.
Q: How much does it usually cost to fix a sagging mattress?
A: The cost of fixing a sagging mattress can vary depending on the method used and the severity of the sagging. Placing a board or getting a topper may cost around $50-$100, while replacing the support system or getting a new mattress may cost several hundred dollars.
Q: Can a mattress topper be used instead of replacing the entire mattress?
A: Yes, a mattress topper can be a cost-effective way to add support and prolong the life of a sagging mattress.
Related Products: Fixing Sagging Mattresses
- Mattress Topper – A great way to fix a sagging mattress is by adding a mattress topper on top of it. This will not only add an extra layer of comfort, but it also helps to evenly distribute your weight and reduce pressure points. A memory foam mattress ( This Memory Foam Mattress is Revolutionizing the Way We Sleep! ) topper is a popular choice, and the Linenspa 2 Inch Gel Infused Memory Foam Mattress Topper is a highly-rated option on Amazon.
- Bed Board – A bed board sits on top of your mattress support system, and helps to create a flat and firm surface for your mattress. This can be a great way to fix a sagging mattress, especially if the problem is caused by a worn-out box spring or slats. The Zinus Deepak Easy Assembly Wood Slat 1.6 Inch Bunkie Board Bed Slat Replacement is a popular choice on Amazon.
- Mattress Support – If your sagging mattress is caused by a weak or worn-out support system, you may want to consider adding a mattress support product. The Bed Boost Mattress Support is a highly-rated product on Amazon, consisting of an adjustable metal frame that can be placed underneath your mattress to provide extra support and eliminate sagging.
- Pillow or Cushion Support – If your sagging mattress is caused by a dip or depression in one area, you may be able to fix the problem by adding a pillow or cushion for extra support. Simply place the cushion or pillow in the area where the sagging occurs to provide extra lift and support. The Cushy Form Bed Wedge Pillow is a good option for added support, and is available on Amazon.
- Replace Old Mattress – Sometimes, the best solution for fixing a sagging mattress is simply to replace the old one. A new mattress will provide proper support and comfort, and can improve your quality of sleep. There are many great options available on Amazon, such as the Tuft & Needle Original Mattress, which is a highly-rated, budget-friendly choice.
- Mattress Wedges – If you tend to slide down in your bed and contribute to the sagging effect of your mattress, you may want to try using a mattress wedge. This is a triangular-shaped foam pillow that sits underneath your fitted sheet at the foot of your bed. It promotes healthy sleep posture and prevents sliding down. The InteVision Foam Wedge Bed Pillow is a top-rated product on Amazon.
- Mattress Encasement – If your sagging mattress is caused by a weak or worn-out support system, you may want to protect your investment by adding a mattress encasement. This product will help to increase the lifespan of your mattress and prevent sagging from occurring in the future. The Linenspa Zippered Waterproof, Dust Mite, and Bed Bug Proof Mattress Encasement is a great choice on Amazon.
- Foam Inserts – Sagging mattresses can also be caused by worn-out internal foam layers. You may be able to remedy this by adding a foam insert. Simply unzip your mattress cover and slide the foam insert into the area where the sagging occurs. The Bluewave Bedding Ultra Slim Gel-Infused Memory Foam Pillow is an excellent option for this purpose, with multiple sizes and thicknesses available on Amazon.
- Mattress Hygiene Kits – Sometimes, a sagging mattress can be caused by the accumulation of sweat, dead skin cells, and other debris. This can lead to the breakdown of foam layers and a loss of support. One solution to this problem is to use a mattress hygiene kit. The CleanRest Pro Full Mattress Encasement and Pillow Protectors are a highly-rated product on Amazon, and come with a complete kit for cleaning and protecting your mattress.
- Adjustable Base – If your sagging mattress is caused by a weak or outdated bed frame, you may want to upgrade to an adjustable base. This will allow you to customize your sleeping position ( Unlock the Perfect Sleep with These Recommended Sleeping Positions ) for optimal comfort and support, and can help to fix the problem of sagging. The Classic Brands Adjustable Comfort Upholstered Adjustable Bed Base is a top-rated option on Amazon.
